Ice Fishing => General Discussion => Topic started by: wannafish on January 03, 2016, 07:15:43 PM
Title: Bobber stops
Post by: wannafish on January 03, 2016, 07:15:43 PM
With this cold finally hitting I've been getting my gear ready and wanna get some opinions on bobber stops I usually use the string type but when fighting fish or just moving the string to change depth my 4lb line pigtails i was wondering if someone on here has had the same problem and maybe found a solution or a different style of stop that eliminates this problem having to cut out bad sections of line and re-tie all day gets kinda old ....I've thought of stepping up to 6lb but its more fun to fish 4lb
Title: Re: Bobber stops
Post by: holehopper on January 03, 2016, 07:34:57 PM
I have used the string type,but much prefer the little plastic ones,they are available for different line tests,most everyone carries them(eagleclaw)
Title: Re: Bobber stops
Post by: 30inthabucket on January 03, 2016, 07:46:25 PM
Same here hh. Very rarely use the string stops anymore. The rubber bead ones are way better and you can get a bunch of them for very little money on amazon or ebay. It's amazing what they charge for bobber stops some places.
Title: Re: Bobber stops
Post by: icebucketjohn on January 04, 2016, 06:18:29 AM
I use the string type., never had any problems with them.. even made my own a few years ago).
Title: Re: Bobber stops
Post by: Downthehole on January 04, 2016, 09:23:21 AM
Hi All,
Why do you use bobbers/bobber stops at all?.....just wondering....
I use them on soft water a lot however; I'm not sure why I would use the on hard water unless I didn't have a flasher. Rod tips and spring bobbers seem to be ample for detecting a bite. Are there other reasons why a bobber would be used? Is it more of a preference thing?
Thanks in advance for any advice?
Andy
Title: Re: Bobber stops
Post by: slabslayer on January 04, 2016, 10:08:18 AM
I never use bobbers thru the ice. I carry some just in case, but dead sticks set to depth with my Vex or a spring bobber on my jigging rod is all I ever use. I can feel the bite better with a direct connection to the lure, not slack between bobber and rod tip.
Title: Re: Bobber stops
Post by: Strongpersuader on January 04, 2016, 11:04:37 AM
I used the sponge type for awhile when I first got into ice fishing back in the early 80's. Nothing but springs for a long time now. Just picked up a few at GM actually. Man has the sport progressed or what? But I must say I caught a lot of fish back then too. That's my "old man reminiscing" for the day. 8)
Title: Re: Bobber stops
Post by: wannafish on January 04, 2016, 02:22:28 PM
I spend most my ice season on lake Erie catching steelhead not running bobbers works but with two rods about 20 feet apart I find I'm constantly staring at the rod tips for a bite when I use bobbers I can just look for the bobber tip and move onto the next rod running 2 rods and 3 jawjackers really keeps you busy
Title: Re: Bobber stops
Post by: Downthehole on January 04, 2016, 03:07:15 PM
I spend most my ice season on lake Erie catching steelhead not running bobbers works but with two rods about 20 feet apart I find I'm constantly staring at the rod tips for a bite when I use bobbers I can just look for the bobber tip and move onto the next rod running 2 rods and 3 jawjackers really keeps you busy
Ahh ok, that makes sense....thanks for clarifying, very helpful....
Title: Re: Bobber stops
Post by: g on January 04, 2016, 05:24:09 PM
When fishing deep water, a bobber stop can be set at 5 or 6 feet so you know when a fish is close to the hole, especially when fishing dirty water.
Title: Re: Bobber stops
Post by: Downthehole on January 04, 2016, 05:53:50 PM
When fishing deep water, a bobber stop can be set at 5 or 6 feet so you know when a fish is close to the hole, especially when fishing dirty water.
That's a good idea, use one as an indicator.....
Title: Re: Bobber stops
Post by: 30inthabucket on January 04, 2016, 06:12:17 PM
I use a small ice bobber on my second rod if I'm panfishing shallow. Set it just of the bottom and jiggle it every once in a while. That way I don't have to worry about checking my depth every time and don't have to move my transducer back and forth. Worked really well on Indian last year.
Title: Re: Bobber stops
Post by: toadfish on January 06, 2016, 06:26:14 PM
I tie my own string bobber stops and have never had any problems with them slipping after they are wet. Make sure you trim the string very close to the line. PM me your address and I will send you a few, if you want. I use beads from jannnetcraft.com with the stops.
Like others, I have stopped using bobbers and have gone with spring bobbers instead.
I would love to catch steelies/rainbows through the ice, but I live on the west end of the state, not the east where their numbers are higher. I also know very little on how and where to find them.
Good luck this season, if there is one.
Title: Re: Bobber stops
Post by: snowcone on January 06, 2016, 10:36:07 PM
I like the tiny little rubber ones that look like a little football