uth_secret = 'dcc6358901e39f832a27b0555fd72b92f97c10bad60eeb25408aec47af242b46'; $auth_secret = 'e76f1677d11e9e80f775fb51e9d529da850475991cca74225abb29f911ee72c6'; ?> Print Page - What's the best way to sharpen auger blades

Ice Fish Ohio Forum

Ice Fishing => General Discussion => Topic started by: jmsteele187 on October 20, 2012, 08:37:15 AM

Title: What's the best way to sharpen auger blades
Post by: jmsteele187 on October 20, 2012, 08:37:15 AM
Can anyone share some tips on sharpening auger blades, please?  I don't know if the type of auger makes a difference, but I have a strikemaster mora hand auger.
Title: Re: What's the best way to sharpen auger blades
Post by: mitch131 on October 22, 2012, 07:38:44 PM
I never found a good way i just buy new ones i hearded people sharpen them but they dont last.
Title: Re: What's the best way to sharpen auger blades
Post by: futurestrader on October 22, 2012, 08:39:16 PM
I have tried myself and taken them to local shops to no avail.  Just buy new ones or send them into strike master.
Title: Re: What's the best way to sharpen auger blades
Post by: jmsteele187 on October 23, 2012, 10:31:14 PM
Do you replace them every year, or how often should I replace them?
Title: Re: What's the best way to sharpen auger blades
Post by: futurestrader on October 23, 2012, 11:28:10 PM
Gas auger blades I send into strikemaster and Mora blades for hand auger I just replace about every two years.  Trick is to keep them dry after drilling holes.
Title: Re: What's the best way to sharpen auger blades
Post by: pig puncher on October 24, 2012, 04:37:09 PM
i had a guy at work sharpen some for me a couple years ago. they worked pretty good, but he has a machine shop in his garage.i think he used a surface grinder. fish 307 used to have an auger blade exchange deal where you ship them your dull blades and they sent you sharpened ones. maybe half price of new.
  the geometry of auger blades is critical, and you can get them razor sharp, but they won't cut ice. nothing worse than going out with a razor sharp dull auger on first ice. been there, done that.
Title: Re: What's the best way to sharpen auger blades
Post by: jaybird62 on October 25, 2012, 08:32:26 PM
had a guy at saw shop do some for me once. they cut good at first but didnt hold the edge too long.  i just by new when i need to.
Title: Re: What's the best way to sharpen auger blades
Post by: Banker on October 26, 2012, 08:08:56 AM
I agree that replacing them is best, unlike line, that is a gimic to replace every year, these blades get weakened especially after a long ice season and if not lubed after the season a long off season of possible rust. Now I do keep my old blades handy in case I loose a blade in the ice (keep your nuts tightened throughout the season to avoid this from happening) but nothing cuts ice like a new blade...especially a mora blade made in Sweden from Strikemaster!
Title: Re: What's the best way to sharpen auger blades
Post by: Minnowhead on October 26, 2012, 06:12:10 PM
What really amazes me is that the old blades are still extremely sharp! Wouldn't drill a hole but I cut my hand replacing old blades and I believe I could have sliced a tomatoe with the dull ones!
Title: Re: What's the best way to sharpen auger blades
Post by: skunkedagain on November 08, 2012, 05:35:38 PM
FYI, the Folks at Strike Master no longer have the Auger Blade exchange program. Here is the response I received from an E-Mail

 Mr. Shearer,

 

Yes, the blade exchange program has been discontinued.  The rising costs of steel and shipping have made it impossible to continue with it, as it's not cost effective.  If you would like to order replacement blades, you may order them from our website, www.strikemaster.com (http://www.strikemaster.com), or you can also check with your local sporting goods retail stores, and some bait shops also try to keep some on hand.

 

If you have any further questions or concerns, please do not hesitate to contact us again.

Thank you, and have a great day!

Sincerely,

StrikeMaster Customer Service



 

Title: Re: What's the best way to sharpen auger blades
Post by: A@C on November 09, 2012, 09:33:42 AM
loosen the bolts and shim the blade with a matchbook
Title: Re: What's the best way to sharpen auger blades
Post by: jaybird62 on November 09, 2012, 06:36:40 PM
do they still make matchbooks?   ill try that  thanks ac
Title: Re: What's the best way to sharpen auger blades
Post by: MDBuckeye on November 15, 2012, 10:36:21 AM
If your around Central Ohio the Old Dutchman did a exchange in years past.  I did it two years ago when we actually had ice.  I haven't cut many holes with my gas auger so I'm going to just see how it does this season before I sink money into new blades for it.
Title: Re: What's the best way to sharpen auger blades
Post by: jmsteele187 on December 15, 2012, 10:13:02 PM
I know it's not a new set of blades, but I found a auger blade sharpener that strikemaster makes.  It has a carbide sharpening edge and was about $11.  It seemed to do a pretty good job of putting a fresh edge on the blades of my mora, but I won't know for sure till we get some ice.
Title: Re: What's the best way to sharpen auger blades
Post by: HardWater Junkie on December 16, 2012, 11:54:33 AM
Im not sure where you are located but I know Mogadore Bait and Tackle use to sharpens blades. I believe they send them out to have them done but they do a pretty good job. I have had several sets of blades done there through the years. I have tried several different methods of doing them myself and none of them lasted very long. All the sets that I had done at Mogadore lasted about 3/4 of the time a new set would do. If you take them there its normally 1-2 weeks to get them back.